Front page > Technology
TECHNOLOGY
CW42® delivers healthy, clean and pure water from any fresh water source. It removes or controls the levels of bacteria, dangerous metals and chemicals and gives you drinking water better than the quality standards set by the World Health Organisation (WHO).
The CW42® utilises both new technology and proven existing technology. It has five stages of filtration. These stages interact with one another to provide performance that is better than the sum of the parts.
The CW42® uses a mixture of new and existing technology to produce top quality drinking water. This design is not intended to produce ultra pure water. In all other filters that utilise ceramic filters these have to be put before the other active stages to avoid bacterial colonisation of the system. Uniquely, the design of the CW42® allows us to put the ceramic downstream of the redox alloy giving greatly enhanced removal of some precipitates. No other water purification system has the same performance in removing bacteria, metals and chemicals for the price of the CW42®.
Printable version of this page
Schematic Diagram
CW42® - Stages of Filtration
1. Pre-filter
Designed to remove particulate matter such as sand, rust, algae etc from water to a predefined size, e.g. 5µm. In situations where the water is not extremely dirty, a low capacity disc pre-filter in the bottom of the OSC cartridge is sufficient. In areas where very dirty water is to be processed a separate pre-filter before the CW42® is desirable.
2. Redox Alloy
Redox Alloy is an alloy of very high purity copper and zinc. It removes chlorine and heavy metals from water in exchange for zinc ions. It also causes iron and aluminium to precipitate. Once in suspension the ceramic filter removes these metals. (This is one example of the importance of the order of the components in the CW42®).
3. OSC
OSC is our patented activated carbon. It is designed to have maximum adsorption of metals and minimum adsorption of organics. The adsorbed metals inhibit bacterial colonisation of the carbon and the absence of chlorine assured by the preceding redox alloy assures that no metals will be displaced.
4. Ceramic filter
This is a silvered ceramic mechanical filter rated at 0.3 µm. It removes all pathogenic bacteria and all protozoan cysts (such as Cryptosporidium). Other small particulates (such as suspended iron and aluminium) are also removed. The ceramic is designed to be user cleanable if necessary.
5. Solid Block Carbon
This is activated carbon extruded into a cylinder to minimise the effects of "channelling". It is designed to remove organic contamination from water. There is no possibility of colonisation by pathogenic bacteria because it is protected by the ceramic element and there is no possibility of the re-release of organics because of the absence of chlorine and metals at this stage.
CW42® Water Purification Technology:
A unique multistage water filtration system
Removes all contaminants (bacteria, chemicals and metals) in water through elecrochemical processes (reduction, oxidation, adsorption, adsorption, absorption and mechanical filtration)
The technology promises protection from waterborne disease.
A combination of existing well proven technologies and unique new developments.
Contains no hazardous materials
All components are 100% recycable
Advantages of the CW42®
Costs a lot less than competing systems.
Can be used anywhere (even in rural situations) because it requires no power. Minimum water pressure is 1-1,5 bar.
Can be adapted for use in private households, cabins, boats, offices, medical applications, hospitals, military etc.
Easy to install and requires little maintenance.
You do not need to keep storage or do heavy lifts to change the filters.
Does not remove important trace minerals that the body needs.
Taste much better than tap water, bottled water or water from containers.
Always fresh, clean and safe water in unlimited amounts.
CW42® er testet av:
University of Edinburgh
University of Sunderland
SNDT Woman's University, Mumbai, India
East of Scotland Water Authorities
West of Scotland Water Authorities
Babcock Scientific
Næringsmiddeltilsynet, Norway
Teknologisk Institutt, Norway

Contaminant removal statics -
CW42® Water Purification Technology

(> = more than)
 
Bacteria:
 
E. Coli 99.9999%
Total Coliforms 99.9999%
Shigella 99.9999%
Typhoid 99.9999%
Cholera 99.9999%
Salmonella 99.9999%
Legionella 99.9999%
Campylobacter 99.9999%
Cryptosporidium 100%
Giardia 100%
Metals:
 
Lead >99.5%
Aluminium >97.9%
Cadmium >99.5%
Chromium >99.3%
Copper >98.4%
Mercury >99.5%
Iron >73.7%
Arsenic >98.3%
Notes: The CW42® provides a physical barrier to
all pathogenic bacteria. In fact, the system will
stop supplying water before allowing dangerous
levels of bacteria into the drinking water supply.
If water containing 100 µg/L of Lead was purified using the CW42® the output water would contain less than 1 µg/L of Lead.
Chlorine and Trihalomethanes Pesticides and Herbicides
Chlorine >100%
Chloroform >99.99%
Dichlorobromethane >99.99%
Dibromochioromethane >99.99%
Dichiorodifluoromethane >99.99%
Carbon Tetrachloride >99.99%
Trichloroethylene >99.99%
Tetrachloroethylene >99.99%
Polynuclear Aromatic Hydrocarbons >99.99%
D D T >99.99%
Simazine >99.99%
Atrazine >99.99%
Lindane >99.99%
Melathion >99.99%
Dieldrin >99.5%
Nitrates

>99.99%

In conditions of high nitrate a specially modified filter cartridge may be required.
Nitrites >99.99%
Particles, Sediment and Algae >99.99%

Spesifikasjoner og tester

Printable version of this page
CW42 water treatment technology, Technical performance, by Dr R Morris
The CW42 system - tested by Teknologisk Institutt (norwegian)
Product sertificate - Byggforsk (norwegian)

Fact sheets:

Radon
Asbestos
Chlorine
Cryptosporidium
Giardia
E coli O157
Lead
Iron
Pathogenic bacteria
Heterotrophic bacteria
Colour
Turbidity
WHO Guidelines

Approved by:

Related pages:
Water purifiers
About water
Download Acrobat Reader
You need Adobe Reader to read/view pdf documents.
Download Adobe Reader here.